The Rule-Mate RM2000A pump consists of a powerful Rule bilge pump and a highly intelligent circuit board in a single housing. The pump activated when the water reaches 2-1/2" and automatically shuts off when the pump senses no water against the impeller, reducing the remaining water to approximately 5/8".

Rule-Mate Intelligence
Rule-Mate Bilge pumps have built-in programming that can sense when the pump is running but not pumping water. This is a very unique feature to bilge pumps because it protects the pump and the vessel, especially the vessels batteries. If debris fouls the sensor or the pump becomes air-bound, the pump will stop running and begin to "check" for water every 2-1/2 minutes. Once the debris is removed, the pump will revert to its normal operation, turning on when the water reaches 2-1/2" and shutting off at 5/8".

Specifications

• For fresh water and salt water use only
• 2000 GPH
• Runs on 12V DC power
• Draws 8.4 Amps at 12 VDC
• Requires 15A fuse (not included)
• Discharge port is 1" NPT

Features

• 1" (straight) and 1-1/8" (straight and 90 degree) screw on hose barb ports included
• All-in-one pump and switch system
• Completely submersible
• Extra long-life heavy duty motor
• Marine-grade blocked wiring
• Ignition protection
• CE and ISO 8849 certification

Share this product:
PinterestTwitterFacebook