Rule 51S automatic bilge pump checks for water every 2 1/2 minutes and keep bilge water at the lowest level of any automatic bilge pump. A standard pump and float switch allows water to reach 2" before it activates. Rule Automatic Bilge Pumps activate at 5/8" and drain water down to 1/4". The pump only consumes 0.50 amp hours per day in the check mode. It is engineered with snap-lock strainer base allowing for easy access to clean the strainer and impeller cavity.

Specifications

• For fresh water and salt water use only
• Runs on 12V DC power
• Draws 4.8 Amps at 12 VDC
• Requires 9A fuse (not included)
• Discharge port is 1-1/8"

Features

• Automatic water sensing (no separate float switch required)
• Compact, efficient, long-life motors with ability to run dry for short periods
• Easy-clean, snap-lock strainer bases
• Stainless steel shafts
• Completely submersible
• Marine-grade blocked wiring
• Rust and corrosion protection
• Built-in Thermal Cut-Off (TCO) provides added protection for pump and vessel
• Silent operation with minimal vibration
• Ignition protection
• CE and ISO 8849 certification

Share this product:
PinterestTwitterFacebook